TANK SHIELD 5LTR

TankShield is hydrogen peroxide at 7.9%, stabilised with

silver so it stays active in the tank instead of decomposing

in a few days. Added to stored water it disinfects the water

in the tank, holds a residual for up to two months, and

breaks down to water and oxygen. There is no chlorine, so

there is no chlorine taste or smell in the treated water.

It is the same chemistry as the national brands, blended in

Western Australia and stocked here.

W H E R E I T I S U S E D

Household and farm rainwater tanks

Station homesteads, camps and remote site water

storage

Council depots, ovals, halls and facilities on tank water

Header tanks, trough supply and stored bore water

Alongside UV and cartridge filtration, which it is

compatible with

D I R E C T I O N S A N D D O S E

Add to the tank at the inlet or through the hatch. Water is

ready for use after 24 hours contact. Re-dose every two

months, and after heavy inflow or any contamination event.

Confirm the residual with peroxide test strips; if no residual

reads after 24 hours, repeat the dose. Do not mix with

chlorine, acids or other chemicals.

C O M M O N Q U E S T I O N S

Is the water safe to drink after dosing?

Allow 24 hours contact. The active breaks down to water and

oxygen. TankShield is a disinfection aid and does not replace tank

cleaning, inlet screening or filtration.

Can I use it with a UV unit or filter?

Yes. It is compatible with UV and cartridge filtration and with

copper or poly plumbing.

What if the tank has been chlorinated?

Wait until the chlorine has dissipated, usually a few days, before

dosing. Never add chlorine to a treated tank.

Why is the first dose double?

The purifier is used up as it oxidises organic matter. A second

dose leaves the residual that protects the tank.

Stock, pets and septic systems?

Treated water is fine for stock, pets and gardens after 24 hours,

and has no effect on septic systems at use dilution.